There has been an enormous interest in products intended to minimise the effects of electrostatic discharge in a wide variety of industries. Without careful attention to ESD in manufacturing process, the percentage of defective products increases dramatically. Responding to this demand, Merino Electrostatic Dissipative Laminate has been designed as one of the solutions in minimising electrostatic charge in an electrostatic protected area.

Merino Electrostatic Dissipative Laminate offers one of the best ESD (Electrostatic Discharge) laminate surfaces available today. It provides a safe environment for furniture used in Electrostatic Protected Areas (EPAs). The ESD surface drains out the static charges thereby minimising the chances of sparking and damage to sensitive electronic appliances. At the same time, it does not allow dust particles to accumulate on the surface, resulting in a clean and healthy work place.

 
 
SIZES
6 X 2.5

12 x 5
7 X 3
12 x 6
8 X 4
14 x 6

*All sizes are in feet..
 

Merino ESD Laminates are used in various applications such as, manufacture of circuit boards, and providing a dust free environment in the electronic industry. It can be used in worktops, tabletops in software development centers, assembly line rooms, research laboratories, call centers and general offices. ESD laminates minimise the danger of causing harm to products in storage rooms and server rooms.

ESD Laminates are available in following grades.

  MERINO STANDARD LAMINATE
  MERINO COMPACT LAMINATE
  MERINO POSTFORMING LAMINATE

Available finish Suede

 ESD Properties as per IEC 61340 ESD S-4.1



Test conditions

Humidity - 40% - 60%
Temperature - 22 C - 25 C
 
Test Preferred Value Merino Observed Value
Point to Point Resistance (max.)

<1.0 x 10 ohm

 1.2 x 10 ohm
Point to Ground Resistance (max.)

<1.0 x 10 ohm

  5 x 10 ohm
Surface Resistance (max.)

<1.0 x 10 ohm

2 x 10 ohm
Static Decay (max.)

<2 sec

<0.5 sec